KraussMaffei Extrusion has developed a single-stage extrusion process for PVC roofing membranes that it says can replace the conventional two-step mixing and extrusion route. The process, called PVC InlineMixing, is designed to cut energy use, shorten production time and improve the economics of membrane manufacturing.
From batch mixing to direct feeding
In the established process, PVC powder, plasticizers, additives and fillers are combined batchwise in a separate hot-cold mixer to create a dryblend. The blend is cooled, stored and later plasticized in a twin-screw extruder before being formed into membrane. KraussMaffei's alternative feeds all solid and liquid components directly into the extruder through gravimetric dosing systems. The company describes the result as a continuous process in which materials are dosed as required rather than prepared as separate batches.
Cost and flexibility claims
Because the new route does not require a separate heating-cooling-mixing combination, it avoids investment in that equipment and heats the material only once. KraussMaffei says energy consumption and related costs can fall by up to 75%, with the actual result depending on the formulation, system parameters and location. Removing the standalone mixing stage also reduces the footprint of the overall system and lowers labor costs, according to the company. Maintenance costs are expected to be lower because wear parts associated with the heating-cooling mixer are no longer needed. KraussMaffei frames the combination of lower capital expenditure and lower operating costs as an improvement in overall cost-effectiveness that can support a faster return on investment.
The process also targets production flexibility. Formula adjustments and color changes can be made directly during operation through the integrated control system, according to KraussMaffei. That removes the need to prepare and store separate dryblend batches before a changeover. Christopher Bartel, Head of Sales Flat & Foam at KraussMaffei Extrusion, said the approach offers membrane manufacturers lower production costs, greater flexibility and more efficient manufacturing. In the company's account, producers can respond more quickly to new requirements, adjust formulations during production and reduce both energy use and capital expenditure.
Validation and reference plant
KraussMaffei developed PVC InlineMixing at its Extrusion Technology Center in Laatzen and validated it with industrial roofing membrane formulations. The trials used a co-rotating twin-screw extruder from the ZE 65 BluePower series, equipped with loss-in-weight feeders for all solid components and multiple liquid feeders for free-flowing formulation components. The ZE BluePower series has a Da/Di ratio of 1.65. According to KraussMaffei, the combination of high torque and large free volume provides a wide process window for different formulations.
The tests confirmed what the company describes as excellent gelation levels for the PVC and high product quality. The mechanical properties and weldability of the membranes also met industrial requirements, and the results were validated across several formulations. Bartel said the results show the potential of PVC InlineMixing for industrial roofing membrane production. He added that the Technology Center works with customers to test specific formulations under production-relevant conditions, optimize the process and prepare the basis for industrial implementation.
PVC InlineMixing is already running in an industrial production line for PVC roofing membranes. The reference plant uses two extruders and two calenders to achieve a total throughput of 1,800 kg/h. In that line, PVC, additives and fillers, along with edge trimmings produced during membrane manufacture, are processed continuously into finished membranes. KraussMaffei presents the process as a way to combine product quality with a leaner production route, yielding more cost-effective and flexible output.
